Back

KM Series Thermal Fluid Heater

KM Series Hot Oil Systems

KM SERIES HOT OIL SYSTEM

Compact, skid mounted thermal fluid system designed for operating temperatures up to 550F using mineral oils and synthetic based heat transfer fluids. KM Series standard components include an electric heater, centrifugal pump with an air cooled mechanical seal, isolation valves, expansion tank, foam glass insulation with aluminum jacket, and a control panel, all mounted on a drip proof base. Cooling capability is available with the use of a shell and tube heat exchanger and three way diverting valve (KMS Model).

View Catalog Listing

Specifications

  • Electrically Operated
  • Temperatures up to 550⁰F
  • 9 to 120 kW and Higher
  • Centrifugal Pump
  • 150 lb. Flanged Construction
  • 208V Through 575V, 3 Phase
  • NEMA 12, 4, or 7

Features

  • All Welded Construction
  • Closed Cell Insulation
  • Drip-Proof Base
  • Discharge Pressure Gauge Interlock
  • High Limit Device Safety Interlock
  • SCR on Each Heater Circuit
  • Hot Functional Test

Custom KM Series Examples

  • Model: KMS550-80-483
  • Design Temp: 550⁰F
  • Design Pressure: 150 PSIG
  • Rating (kW): 80
  • Application: Ultra HD Sensor Manufacturing
  • Custom Features:
    • Fully Modulating Three Way Diverting Valve
    • Parallel Cooling Circuits on All KMS Models
    • Shell & Tube Cooling Exchanger
    • Required Cooling Exchanger Flow - Safety Interlock
  • Model: KMS550-48-483-ZP
  • Design Temp: 550⁰F
  • Design Pressure: 150 PSIG
  • Rating (kW): 48
  • Application: Chemical Reactor Vessel
  • Custom Features:
    • Class 1, Division 2 Control Center Purge Kit
    • Fully Modulating Three Way Diverting Valve
    • Shell & Tube Cooling Exchanger
    • Required Cooling Exchanger Flow - Safety Interlock
  • Model: KM550-18-483
  • Design Temp: 550⁰F
  • Design Pressure: 100 PSIG
  • Rating (kW): 18
  • Application: Vacuum Shelf Drier
  • Custom Features:
    • NEMA 4 Fiberglass Control Center
    • Coil Cooling Option on Heater Chamber
    • Built-In Hour Meter for Maintenance Purposes
  • Model: KM550-36-483
  • Design Temp: 550⁰F
  • Design Pressure: 100 PSIG
  • Rating (kW): 36
  • Application: Platen Press for Electronics
  • Custom Features:
    • Top Mounted Expansion Tank with Low Level Switch
    • Differential Pressure Switch
    • Low Pressure Switch
    • Audible Safety Interlock Warning Horn

FIND YOUR SOLUTION TODAY BY GETTING IN TOUCH WITH
HEAT EXCHANGE & TRANSFER, INC.