Used Hot Oil Heaters, Used Hot Oil Systems, Refurbished Hot Oil Heaters

New Hot Oil Heaters

Hot Oil Heat Transfer System rated 60KW, 480V, 3PH bulk medium temperature of 550 degrees F

Model # SL550-60-CSA-483 (New)

Hot Oil Heat Transfer System, rated 60KW, 480V, 3PH for a maximum continuous bulk medium temperature of 550 Deg. F, equipped with air cooled centrifugal pump generating up to 40GPM at 40 psig, ASME stamped heater vessel, 8”-150 lb. flanged immersion heater rated 60KW with NEMA 12 terminal enclosure, isolation gate valves, 1-1/2" 150# flanged process connections, remote mounted 24 gallon Expansion Tank, CSA certified, skid mounted NEMA 12 Control Center featuring a PID temperature controller, SCR’s, and motor starter, drip proof base pan, non wicking cellular glass insulation.

Model #UST0802-20-82S-483

Storage Tank Heater with an 8" 150# ANSI stainless steel tank mounting flange with two (2) pcs. of 3" sch. 40 stainless steel heater element dry pipe wells with an 82" immersion length, , All 304SS wetted materials, unit includes (1) Type J T/C in a closed thermowell for high temperature sensing, and a NEMA 4X Terminal Housing. The heater elements in this unit are currently rated at 20KW, 480V, 3PH with a heat flux of 12 watts per square inch. The elements are removable from the dry wells so there is never a need to drain the tank to change the elements. This unit can also be modified to suit different wattage and voltage combinations if desired.

Refurbished Hot Oil Heaters

Model # WG250-10-483 (Refurbished)

Hot Water/Glycol Heat Transfer System, rated 10KW, 480V, 3PH for a maximum continuous fluid temperature of 250 Deg. F, equipped with centrifugal pump generating 20 GPM at 40 psig, 3”-150 lb. flanged immersion heater rated 10KW with NEMA 7 terminal enclosure for use in hazardous area, isolation ball valves, 1-1/2" NPT process connections, top mounted 18 gallon Expansion Tank, skid mounted NEMA 4, air purged Control Center featuring a PID temperature controller, SCR’s, and motor starter, drip proof base pan, non wicking cellular glass insulation.

Hot Oil Heater 80KW, 480V, 3PH for continuous bulk medium temperature of 650 degrees F

Another View - Refurbished Hot Oil Heater 80KW, 480V, 3PH for continuous bulk medium temperature of 650 degrees F

Model # SL650-80-483 (Refurbished)

Hot Oil Heat Transfer System, rated 80KW, 480V, 3PH for a maximum continuous bulk medium temperature of 650 Deg. F, equipped with water cooled canned motor centrifugal pump generating up to 50GPM at 40 psig, 10”-300 lb. flanged immersion heater rated 80KW with extended NEMA 12 terminal enclosure, bellow sealed isolation gate valves, 1-1/2" 300# flanged process connections, top mounted 35 gallon Expansion Tank, skid mounted NEMA 12 Control Center featuring a PID temperature controller, SCR’s, and motor starter, drip proof base pan, non wicking cellular glass insulation.

Surplus Hot Oil Heaters (never used)

Hot Oil Heat Transfer System rated 220KW, 480V, 3PH for continuous bulk medium temperature of 550 - never used

Model # SL550-220-483 (Surplus – never used)

Hot Oil Heat Transfer System, rated 220KW, 480V, 3PH for a maximum continuous bulk medium temperature of 550 Deg. F, equipped with air cooled centrifugal pump generating 120GPM at 90’ TDH with 7.5 HP, 1750 rpm TEFC motor, two 10”-300 lb. flanged immersion heaters, each rated 110KW with NEMA 7 terminal enclosures, isolation gate valves, 3" 300 lb. flanged process connections, top mounted 40 gallon Expansion Tank, remote mounted NEMA 12 Control Center featuring a PID temperature controller, SCR’s, and motor starter, non wicking cellular glass insulation with aluminum jacketing.