Application Data Inquiry Form

Tell us about your application

Application Data Inquiry Form

Use the steps below to tell us more about your application, or learn more about our application solutions here.

1

Choose one of the following:

Thermal Fluid Systems

Used for Indirect Temperature Control of your Process Equipment

Electric Process Heaters

Used for Direct Heating of Flowing Liquid or Gas

Tank Heating

Used for Both Direct Heating and Indirect Heating of Tanks

Next

Thermal Fluid Systems

Used to Indirect Temperature Control of your Process Equipment

Which of the following best represents your process equipment?

Rolls

Extrusion

Pipe Line Tracing

Exchangers

Ovens

Mixers & Dryer

Platens & Molds

Vessels & Reactors

Electric Process Heaters

Used for Direct Heating of Flowing Liquid or Gas

Is your application for heating a flowing gas or a flowing liquid?

Direct Heating of Flowing Gas

Direct Heating of Flowing Liquid

Tank Heating

Used for Direct Heating of Flowing Liquid or Gas

Which of the following best represents your process equipment?

Direct Tank Heating Products

Indirect Tank Heating Products

Previous

Next

For use on: Rolls

Which of the following roll examples best represents your roll configuration?

Double Shell Roll with Single Rotary Joint

Double Shell Roll with Single Rotary Joint

Center Bore Roll with Turbulator

Double Shell Roll with Dual Rotary Joint

Double Shell Roll with Dual Rotary Joint

Hollow Roll with Dual Rotary Joints

Spiral Roll with Dual Rotary Joints

For use on: Extrusion Equipment

Which of the following Extrusion equipment best represents your application?

Screw Extruder

Spin Bean

Polymer Die Plate

Polymer Pump

Melt Cooler/Static Mixer

Jacketed Polymer Piping

Casting Belt

For use on: Pipe Line Tracing

Which of the following examples best represents your Tracing Application?

Tube Tracing

Square Tube Tracing

Double Wall Pipe

Bolt-On Jacket

For use on: Process Heat Exchanger

Which of the following Heat Exchangers best represents your application?

Shell & Tube

Plate & Frame

Liquid to Air

Re-Boiler

Static Mixer

Double Pipe

For use on: Ovens

Which of the following Oven Types best represents your application?

Batch Oven

Conveyor Oven

Autoclave Oven

Tenter Frame Oven

Belt Oven

Drum Oven

For use on: Platens & Molds

Which of the following Press or Mold best represents your application?

Platen Press

Tire Press

Extrusion Press

Double Belt Press

Double Belt Press

Die Casting Press

Rotational Molder

Bonding Press

For use on: Vessels & Reactors

Which of the following examples best represents your Vessel Application?

Platen Press

Double Wall Jacketed

Tire Press

Dimple Jacket

Internal Coil

Thin Film Column

Pot Still

Is the flowing gas in a low-pressure duct or high pressure piping? (click on one)

Heating Gas Flowing in a Pipe

Heating Gas Flowing in a Duct

Proceed to the next step by clicking here

Direct Tank Heating Products

Which Direct Tank Heating method is required for your application?

Type FH - Flanged Immersion Heaters

Type UST – Storage Tank Heater

Type OTS – Over the Side Heaters

Type CHP – Circulation Heater Package

Indirect Tank Heating Products

Which Indirect Heating method applies for your application?

Internal Serpentine Coil Type

Internal U-Tube Bundle Type

External Panel Coil Type

External Tube Tracing Jacket Type

Previous

Next

Basic Roll Data:

Roll Diameter: inches

Roll (face) Length: inches

Roll Weight: lbs

Heat up time: hours

Rotary Joint Connection size inlet: inches

Rotary Joint Connection size outlet: inches

Initial Temperature: °F

Maximum operating temperature: °F

Heating Source:

Cooling Requirements:

Basic Extrusion Equipment Data:

Number of zones to control?:

Zone port connection sizes (inlet/outlet)?: inch.

Weight of equipment: lbs

Initial Temperature: °(F/C)

Final operating temperature: °(F/C)

Heat up time: minutes

Product Flow Rate: lbs./hour

Heating Source:

Cooling Requirements:

Basic Pipe Tracing Data:

Diameter of Pipe to be heated: inch.

Length of Pipe to be heated: feet

Tracing Jacket connection port sizes: Inlet in.

Tracing Jacket connection port sizes: Outlet in.

Maintain Product temperature at: degrees F.

Cold Start Heat up time: hours

Initial Temperature: °(F/C)

Final operating temperature: °(F/C)

Heating Source:

Cooling Requirements:

Basic Exchanger Data:

Product/material requiring temperature control:

Flow rate of product/material: lbs/hr or cfm

Product inlet temperature: °(F/C)

Product outlet temperature: °(F/C)

Surface area of exchanger: sq ft

Heating Source:

Cooling Requirements:

Basic Oven Exchanger Data:

Product/material requiring temperature control:

Flow rate of product/material: lbs/hr or cfm

Product inlet temperature: °(F/C)

Product outlet temperature: °(F/C)

Surface area of exchanger: sq ft

Heating Source:

Cooling Requirements:

Basic Mixer/Dryer Data:

Number of zones to control?:

Zone port connection sizes (inlet/outlet)?: inch.

Inlet temperature: °(F/C)

Product Outlet or Final temperature: °(F/C)

Heat up time: minutes

Product weight or Flow Rate: lbs. or lbs./hour

Heating Source:

Cooling Requirements:

Basic Press/Mold Data:

Platen or Mold Length: in

Platen or Mold Width: in

Platen or Mold Thickness: in

Platen or Mold weight: lb each

Number of flow paths through Platen or Mold:

Size of flow paths: in

Heat up time: minutes

Initial Temperature: °(F/C)

Final operating temperature: °(F/C)

Heating Source:

Cooling Requirements:

Basic Vessel Data:

Vessel Volume: gallons

Vessel Weight: lbs.

Jacket connection port sizes: Inlet in

Jacket connection port sizes: Outlet in

Heat up time: minutes

Initial Temperature: °(F/C)

Final operating temperature: °(F/C)

Heating Source:

Cooling Requirements:

Basic Gas Heater Data:

Type of Gas:

Flow Rate: (lb/hr / SCFM / CFM)

Inlet Temperature °F

Outlet Temperature in

Inlet Pressure: (psig / inches H2O)

Area Classification or NEMA rating:

Power Available:

Volts

Phase

Hz

Amps

Basic Liquid Heater Data:

Fluid to be heated:

Flow Rate: (lb/hr / gpm)

Inlet Temperature °F

Outlet Temperature °F

Inlet Pressure psig.

Area Classification or NEMA rating:

Power Available:

Volts

Phase

Hz

Amps

Basic Tank Heater Data:

Tank contents to be heated:

Amount of product to be heated: gallons

Initial Product Temp: °F

Heat Up to: °F

in how many hours hours

Area Classification or NEMA rating:

Power Available:

Volts

Phase

Hz

Amps

Type and Thickness of Insulation (if any):

Previous